Menu
Business Advice9 min
Installation Video Series, Part 3: Installing LP® SmartSide® Panel Siding
It can be common practice for some builders to finish the front of a home with lap siding, and the remaining walls with panel siding. LP® SmartSide® Panel Siding comes in lengths of eight to 10 feet long, and equipped with shiplap edges. This can save money and time during installation.
Once flashing and trim have been properly installed, you can begin hanging your panel siding. But first, let’s not forget some of LP’s basic requirements that we covered in Part 2 of this series.
Installing Panel Siding
All LP SmartSide panel siding may be installed over 16″ on-center framing. When installed over 24″ on-center framing, you must use Precision 190 Series panel siding. Using a nail gun makes quick work of installing LP SmartSide products. You want to use a minimum of .113-inch shank diameter, hot-dipped, galvanized box-style nail with a minimum of .270-inch head diameter. The nails should be long enough to penetrate the structural framing by at least one and one-half inches. Always set your nail gun so the head of the nail is snug against the siding or flush with the siding surface. Try to avoid overdriving the nails. If you do, seal the hole and exposed substrate with an ASTM C920, Class 25 sealant. If a nail is overdriven by more than 1/8″, seal the hole and renail it.
Proper Flashing Guidelines
When you cut your LP SmartSide products to size, always apply primer and paint to the field cuts with a high-quality, 100% acrylic latex paint. The base trim piece must be flashed with Z-flashing. Allow for a 3/8-inch gap above the flashing before installing your panel siding. You’ll want to treat every horizontal joint with flashing and spacing when hanging LP SmartSide panel siding.
Position your panel siding so it is level, and the shiplap edges fall on the center of studs. You will then use a double nailing technique along the shiplap edge. Nail through the shiplap on the first panel, then nail 1″ from the edge at the overlap flange on the second overlapping panel. When nailing the rest of your LP SmartSide panel siding, make sure you space your nails no more than 6 inches apart from the panel edges, around the perimeter, and no more than 12″ apart at the intermediate stud supports.
Whenever your panels butt against windows, doors or trim, leave a minimum of 3/16″ space. Remember, when installing LP SmartSide panel siding around windows, Z-flashing will be required above the window. Don’t forget to allow for a 3/8″ space between the flashing edge and the siding edge. Do not apply sealant in any space where flashing is integrated.
For more detailed information on siding products from LP SmartSide and complete installation instructions, visit the LP SmartSide Installation Video Series.
Continue Reading
Business Solutions
4 minQ&A: How Home Orientation Impacts Continuous Insulation
There’s a lot to consider when it comes to building an energy-efficient home for your clients and the many nuances that change with each build—including its orientation to the sun.
Continue ReadingResiliency Solutions
5 minHOW A RADIANT BARRIER CAN IMPROVE BURIED DUCT PERFORMANCE
There are several insulation methods based on attic design, but ducts placed over the bottom of truss chords and buried under insulation in a vented attic is a popular builder option.
Sustainability Solutions
8 minHow to Drive Effective Communication and Collaboration on the Jobsite
Every jobsite has a ton of moving parts, from product shipments, supplies, and schedules to subcontractors and homeowners. It’s no wonder that many project teams can struggle to maintain quality jobsite communication and collaboration throughout the building process.
Sustainability Solutions
6 minCarbon Negative, Future Positive: LP® Structural Solutions Portfolio Releases Environmental Product Declarations
In an era where environmental responsibility is paramount, we are proud to announce a remarkable achievement: the LP® Structural Solutions portfolio has been officially designated as carbon negative. This milestone is a testament to our unwavering commitment to redefining construction materials for the better with a focus on sustainability, resiliency and groundbreaking advancements.