Menu
Industry Trends4 min
Some Common Misconceptions About Building Enclosures
It’s easy for small amounts of water to enter a home’s wall cavity, both during and after construction. When water evaporates it becomes a gas (water vapor) that needs to escape. If the walls can’t completely dry, a home is more likely to experience mold and rot.
A building material’s ability to let water vapor pass through is called permeance, measured in units called “perms.” There are two ways that the American Society of Testing and Materials (ASTM) measures permeance in its E96 test: Procedure A (desiccant or “dry cup” method) and Procedure B (water cup or “wet cup” method).
Here are some common misconceptions about building enclosure performance and the truths behind them:
- Myth: High-perm products are the most effective way to improve drying rates
TRUTH: “Whether a vapor-control material is 5 perms or 35 perms, the drying rate is usually limited by other materials like the cladding,” says John Straube, a principal at RDH Building Science and an associate professor at the School of Architecture at the University of Waterloo in Canada.
- Myth: The “dry cup” test is the superior way to measure permeance
TRUTH: “The house wrap industry emphasizes the ASTM E96 Procedure A or ‘dry cup’ test,” adds Straube. “But the test that’s more appropriate for in-service use of wood-framed buildings is really Procedure B or the ‘wet cup’ test. I have a colleague who says, ‘Procedure A measures how much water vapor passes through when there isn’t any water vapor, while Procedure B measures how much passes through when there is water vapor.’”
- MYTH: An air/water barrier can prevent all moisture problems
TRUTH: It defeats the purpose of an air/water barrier if a home’s exterior flashing isn’t done properly. “There are far greater mold risks when sheathing gets wet after the home is occupied than when it’s being built,” says Straube. “If windows leak into the wall, that’s really scary because you can’t see it.”
Learn more about the LP WeatherLogic™Air & Water Barrier system, the latest addition to LP’s portfolio of structural solutions.
Continue Reading
Business Solutions
4 minQ&A: How Home Orientation Impacts Continuous Insulation
There’s a lot to consider when it comes to building an energy-efficient home for your clients and the many nuances that change with each build—including its orientation to the sun.
Continue ReadingResiliency Solutions
5 minHOW A RADIANT BARRIER CAN IMPROVE BURIED DUCT PERFORMANCE
There are several insulation methods based on attic design, but ducts placed over the bottom of truss chords and buried under insulation in a vented attic is a popular builder option.
Sustainability Solutions
8 minHow to Drive Effective Communication and Collaboration on the Jobsite
Every jobsite has a ton of moving parts, from product shipments, supplies, and schedules to subcontractors and homeowners. It’s no wonder that many project teams can struggle to maintain quality jobsite communication and collaboration throughout the building process.
Sustainability Solutions
6 minCarbon Negative, Future Positive: LP® Structural Solutions Portfolio Releases Environmental Product Declarations
In an era where environmental responsibility is paramount, we are proud to announce a remarkable achievement: the LP® Structural Solutions portfolio has been officially designated as carbon negative. This milestone is a testament to our unwavering commitment to redefining construction materials for the better with a focus on sustainability, resiliency and groundbreaking advancements.