Menu
Business Advice6 min

Storage and Handling 101: LP® Structural Solutions

Before installation begins, proper storage and handling is critical as you receive products onto the jobsite. When products are handled properly and in accordance with manufacturer’s instructions, you can help avoid damage to new products, use what you order, and help ensure that the product will perform as intended once installed.

Let’s take a look at the basics of proper storage and handling for the LP® Structural Solutions portfolio as well as a few specifics for each product to keep in mind.

LP® Structural Solutions Storage & Handling

No matter the LP Structural Solutions product, there are a few best practices for keeping your materials in great shape once they arrive on the jobsite and wait for installation. Check out the basics to help ensure your products remain ready to install:

  • Store all products in clean, dry areas off the ground.
  • If stored outside, cover products with plastic sheets or tarps. Allow for air circulation by keeping the cover open and away from the sides and bottom of the panels.
  • Don’t drop the panels on corners or crush their edges.
  • Keep your product neatly stacked with weight evenly distributed.
  • Inspect the product prior to installation for any damage.

Product-Specific Storage & Handling Instructions

Because the LP Structural Solutions portfolio is a suite of value-added  products, there are unique considerations that come with each product when it comes to storage and handling. Let’s review the specific storage and handling instructions for each product that help ensure the product’s features, such as overlays, stay in great shape for installation.

LP Legacy® Premium Sub-Flooring

  • Allow panels to acclimate to existing jobsite conditions.
  • Protect edges to avoid damage to the tongue and groove profile.
  • Space units at least four inches on all four sides.

LP® TechShield® Radiant Barrier 

  • Avoid damage to the radiant barrier surface.
  • Protect from moisture prior to and during installation.

LP WeatherLogic® Air & Water Barrier

  • Do not stack higher than four units.
  • If possible, store LP WeatherLogic Seam & Flashing Tape indoors in a conditioned environment to avoid temperature extremes.

LP® FlameBlock® Fire-Rated Sheathing

  • Use caution to avoid damage to the Pyrotite® surface. 
  • Store indoors if possible.

LP NovaCore™ Thermal Insulated Sheathing

  • Store panels indoors or protected from extended UV and water exposure.
  • Use a minimum of three stickers placed evenly under each unit. Stickers should be a minimum of 2-1/2 inches wide. 
  • Do not stack higher than three units. Ensure stickers are aligned vertically when stacking units.
  • Take extra care to ensure the foam insulation is not damaged.

The Importance of Proper Storage & Handling

A great installation doesn’t begin when the first nail is driven—it begins when the product arrives on the jobsite. For the LP Structural Solutions portfolio of products to perform at the highest level, each product must be stored and handled with care. When you begin a build by keeping your product in great condition, you’ll be off to the best start possible.

For more information and complete installation instructions, check out the LP Structural Solutions hub.

storage
handling
structural
OSB sheathing
Continue Reading

Business Solutions

4 min

Q&A: How Home Orientation Impacts Continuous Insulation

There’s a lot to consider when it comes to building an energy-efficient home for your clients and the many nuances that change with each build—including its orientation to the sun.

Continue Reading

Resiliency Solutions

5 min
HOW A RADIANT BARRIER CAN IMPROVE BURIED DUCT PERFORMANCE

There are several insulation methods based on attic design, but ducts placed over the bottom of truss chords and buried under insulation in a vented attic is a popular builder option.

Sustainability Solutions

8 min
How to Drive Effective Communication and Collaboration on the Jobsite

Every jobsite has a ton of moving parts, from product shipments, supplies, and schedules to subcontractors and homeowners. It’s no wonder that many project teams can struggle to maintain quality jobsite communication and collaboration throughout the building process.

Sustainability Solutions

6 min
Carbon Negative, Future Positive: LP® Structural Solutions Portfolio Releases Environmental Product Declarations

In an era where environmental responsibility is paramount, we are proud to announce a remarkable achievement: the LP® Structural Solutions portfolio has been officially designated as carbon negative. This milestone is a testament to our unwavering commitment to redefining construction materials for the better with a focus on sustainability, resiliency and groundbreaking advancements.